top of page

Wildfire Truck Lift

Dump Truck over Ford Dually on Wildfire Truck Lift_edited
Wildfire Lifts 12000lb Truck Lift with 6000lb Air Jack
Wildfire Lifts 12000lb Truck Lift
Wildfire Lifts 12000lb Truck Lift from Front
2023 Denali Ultimate on 33's -18 Offset
2023 Denali Ultimate on 33's -18 Offset Lifted
72 Blazer on 35s on Wildfire 12k Truck Lift 3
72 Blazer on 35s on Wildfire 12k Truck Lift
72 Blazer on 35s on Wildfire 12k Truck Lift 2
Dually Rear Quarter on Wildfire Truck Lift
Dually on Wildfire Truck Lift

$7,495
+Freight

  • 12,000-lb. maximum lifting capacity

  • 6' 10" maximum clearance on top locks

  • Freestanding design requires no bolting down

  • Perfect for parking, storage and service

  • 88" outside runway to outside runway

  • 18' 10" long runways

  • Ship weight 3,230lbs

When our Wildfire XLT just isn't big enough for your BIG truck, our Wildfire Truck Lift will do the trick! This thing truly is a beast! Compare to other 11k-14k lifts in the market and this thing blows them away from a robust build stance as well as shear size. This lift will handle almost any vehicle in your garage or fleet. You can now easily lift your smaller sports cars but also pick up your full size dually trucks. 

With a full 6'10" of clearance under the runways while on the top locks you have plenty of room to park your pick up truck underneath the lift. With the added length (2'6" longer than our XLT) you are able to lift longer wheelbase vehicles as well. Not only that but our Truck Lift is 12" wider outside runway to outside runway when compard to our XLT - this gives you an industry leading 88" outside runway to outside runway, none of our competitors can compete with this!

Double_Locking_Mechanism.png

Safety Locks & "Cable Slack" Locks

All 4 corners of every Wildfire lift come standard with 3/4" thick safety locks that engage simultaneously as the lift passes each lock notch. Add in the addition of a secondary "cable slack" lock on each corner and you have safety on top of safety encase of a very unlikely cable failure. Lastly, both the main and secondary locks are held tightly in place to the post by the wrap around design of our cross beams which eliminates the chance of the locks "missing" or becoming disengaged. Our locks utilize a single manual handle release that accuates all 4 locks in unison without the need for air. Fun fact: Wildfire Lifts has never produce a single lift without a secondary cable slack lock.

Best Car Lift Warranty In The Industry.jpg

 

If you're looking for a no hassle product with a great warranty, then you're in the right place.

 

We know car guys don't want hassles, so included with each lift purchase is our industry leading 5 Year      
"Post-Post Warranty"!

This includes the lift structure, hydraulic ram, motor & parts. This is truly a "post-post" warranty. 

 

You can and should compare Wildfire Lifts warranty against ALL of our competitors.  You will find that just like we over build our lifts to a standard most of our competitors cannot match we do the same with our warranty. How, you ask? Simple, build a better product with better components and better quality control!

Boxed Structural Steel Posts & Wrap Around Crossbeams

5" x 5" structural steel posts in combination with computer guided laser cut lock notches allow us to offer a superior, more rigid and incredibly strong alternative to most "c-channel" lifts on the market. Combine this with a 5/8" thick by 12" x 12" base plate and you get a structural post that is as supportive as it is rigid. When working in conjunction with our 2" x 6" crossbeam that wraps all the way around the post to offer not only front to back but also side to side stability you get a lift that comfortably allows you to raise and lower your vehicle each and every time safety and security. With thicker than industry average sidewalls our crossbeams do not need additional reinforcement. Simply put, we engineer our crossbeams and uprights to a higher level than the average lift by using higher grade stock material when producing our lifts. To put this in perspective, Wildfire Lifts uses 6mm (.236") thick side walls on our upright posts and crossbeams while other "similar looking" lifts only utilize 5mm upright posts and crossbeams (.196") this means that Wildfire Lifts offers upright posts and crossbeams that are ~20% thicker and more robust than our "look alike competitors" - when we say no one builds lifts that are as stable or as robust as we do, we mean it! You benefit from a more secure and more robust lift! (don't let those guys try and round their number to a 1/4" when you speak with them, that is factually inaccurate). Also note that all Wildfire Lifts posts and crossbeams are last cut for clean uniform lines, have you looked at the photos from our competitors who use hand laser cuters and it looks as such?!

Post_and_Base_Plate_Image.png
IMG-3522.JPG

"Cable Keepers"

Each and every cable underneath the runway that is used to safely lift your vehicle is held in place to ensure it can not become is dislodged from the ball bearing pulley while in operation or not. These "cable keepers" keep a tight enough tolerance to allow the cables to operate as intended but not allow for them to every slip off of the pulley.

Fully Sealed Ball Bearing Pulleys

The Wildfire family of lifts was designed with the purpose of longevity in mind. In order to keep up with this idea every single pulley used on our lifts is an accessible ball bearing style. This allows for easy and minimal maintenance to keep your lift in its best operation state for years and years to come. Every pulley on our lifts are fully sealed ball bearing pulleys for unmatched longevity - the photos shown are an open bearing to show the style but all bearings are fully sealed on your lift. NOTE: Some competitors will advertise/sell "oilless bearings" please note that these are brass bushings with an attempt to name them something that sounds better than what they are. Also note, some companies will advertise/sell nylon sliders, these are in most cases sleeves that wrap the shaft just like a brass bushing and are in no way a replacement for a fully sealed ball bearing pulley. Be aware - the more you know, the more you can compare.

Sealed Bearing_edited.jpg
Flow Restrictor - Wildfire Lifts.JPG

Flow Restrictor (aka Anti Surge Valve)

Directly coming out of the hydraulic cylinder is a brass fitting with an associated flow restricting orifice in place to limit the overall downward speed of the lift. This flow restrictor is in place as an additional level of security in case of an accident that damaged a hydraulic hose. Unlike many competitors who place their flow restrictors in the motor unit we place it directly on the hydraulic ram so that no fluid travels through a hydraulic hose before flowing through the restrictor. Fun Fact: Wildfire Lifts has never produce a single lift without a flow restrictor (anti surge valve as worded by some competitors).

Hydraulic Ram Wheels

While under load the hydraulic ram twists slightly which could limit operation as well as damaged the underside of a lift. However, all Wildfire lifts come with a bracket that has wheels mounted to it to allow the ram to easily and smoothly operate in and out without contacting or causing damage to itself on the bottom of the runway. These wheels are meant to last the lifespan of the lift and do not deteriorate. Our wheel design is a much better option than a sliding nylon block. It costs us more time and money to produce this way vs a nylon block but here at Wildfire Lifts that is what we do.

IMG-0088.JPG
Industry Leading 4 Post Car Lift Motor -

3hp ETL Certified 220V Motor

The Wildfire Lifts Truck Lift comes equipped with a 3hp 220V Motor, 1Ph, 60HZ. This motor offers more power than most of our competitors on the market. It is a more expensive motor and a higher quality motor which falls right in line with other high quality components we offer on all of our lifts.

In the history of our company, Wildfire Lifts has never produced a lift without a motor that is ETL certified (3rd party independently tested). 

Included Accessories With Each Wildfire Truck Lift

IMG-4975.JPG

Rolling Jack Tray & Drip Trays

1 Rolling jack tray with associated tension locks to keep the tray better positioned while in use. Unlike many jack trays on the market you have likely seen, our jack tray rolls vs sliding which can bind up or worse cause damage to the runway surface itself. 

3 Drip Trays - 24" x 37". While some of you have cars that don't drip, many others do so we include these to help keep the vehicle or items below clean and dry. We provide 6' of drip tray coverage with 3 drip trays, some competitors sell their lifts with 4, 18" drip trays which gives the same overall coverage of 6'.

Casters_In_Use_-_Wildfire_Lifts.png

Caster Set

sar.png

36" Aluminum Approach Ramps

IMG-0307.JPG

Tire Stops

Full set of 4 tires stops. One piece for the end of each runway.

"I purchased the XL and it is fantastic. It has no problem lifting my Ram 3500 Mega Cab Diesel that weighs well over 8000lbs. Brad was incredible from a customer service perspective. Very satisfied." 
Patrick F. - Pittsboro, NC - WF9000XLT - 5 Star Review
Lift_Diagram_Image.png
XLT & TRK Spec Chart.png
Popular Accessories To Outfit Your New Wildfire Truck Lift
Aluminum Decking Inserts
Rolling Bridge Jacks
Car Lift Bridge Jack.jpg

**If researching our competitors be VERY CAUTIOUS if you read that they have a runway that can move to make a wider landing for your vehicle. While this is not incorrect, it can be very misleading, in order to go wider it will OFFSET your loading to one side and can create big issues with loading vs widening the stance evenly. You cannot move both runways with this type of a lift (only the runway without cables or ram) as it would elongate one set of cables and shorten the other set of cables by moving the ramp with the hydraulic ram and cable assemblies. Please use caution as this is sold as a benefit but in reality it can be a detriment as your already wider vehicle is now offset closer to the post and cable potentially causing contact or very tight fitments which is likely what you're attempting to avoid - please just use caution and analyze for yourself.** 

Wildfire Lifts does not guarantee the fitment of any vehicles as this can be "subjective" with some customers. We provide the necassary measurements above to allow you, the customer, to determine the best lift for your needs.

Full 360* ball bearing caster wheels make for easy moving of your Wildfire Lift. 

Interested in a Wildfire Lift?

The 3 MAIN differences between the Standard & XLT are:

1. The XLT offers 6' 10" of clearance under the runways on the top lock, the Standard offers 6'.

2. The XLT runways are 20" longer than the Standard.

3. The XLT crossbeam is 6.5" wider than the Standard which offers more drive through clearance. 

  • Why Prestretched Cables Are SOOO Important On A 4 Post Lift! (VIDEO)
  • Spare Parts (VIDEO)
  • Bearings vs Bushings In A 4 Post Lift (VIDEO)
  • How Does Shipping Work? HINT: We do it for you! (VIDEO)
    ABF Service CEnter Lookup --> https://arcb.com/apps/service-search
  • Why Haven't I Heard of Wildfire Lifts Before?! (VIDEO)
  • How Can Wildfire Offer Such Great Pricing on 4 Post Lifts (VIDEO)
  • Why no "Free Shipping"? (VIDEO)
  • Where Can The Motor Be Located On A 4 Post Lift? (VIDEO)
  • Wildfire Lifts Is The OEM 4 Post Lift Manufacturer (VIDEO)
  • What Are The Concrete Requirements For A 4 Post Lift? (VIDEO)
  • How Much Ceiling Height Do I Need For A 4 Post Lift? (VIDEO)
    Link to our Ceiling Height Chart --> www.wildfirelifts.com/faq
bottom of page